Difference between revisions of "Leapfrog Creatr"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
==Octoprint Information== | |||
;Octoprint Web Page | |||
:http://hh-octopi-3.local/ | |||
;IP Address | |||
:192.168.1.130 | |||
;Suggested Tool Flow (See Instructables link below): | |||
:# Obtain STL or OBJ model from thingiverse or craft one in modelling software (I like 123d for simple shapes). | |||
:# Configure print settings and slice using Slic3r. | |||
:# Upload directly from Slic3r to Octoprint. | |||
:# Start and monitor print from Octoprint web interface. | |||
:# Cancel Print if needed or adjust temperatures on the fly. | |||
:# Admire freshly 3d printed object. | |||
==Manufacturer== | |||
* Manufacturer Website: https://www.lpfrg.com/# | * Manufacturer Website: https://www.lpfrg.com/# | ||
* Support Site : http://creatr.lpfrg.com/support/home | * Support Site : http://creatr.lpfrg.com/support/home | ||
==Manual== | |||
* Manual: http://creatr.lpfrg.com/support/home#userManual | * Manual: http://creatr.lpfrg.com/support/home#userManual | ||
* Local Copy of Manual: [[Media:Leapfrog Creatr Manual.pdf]] | * Local Copy of Manual: [[Media:Leapfrog Creatr Manual.pdf]] |
Revision as of 21:32, 24 January 2020
Octoprint Information
- Octoprint Web Page
- http://hh-octopi-3.local/
- IP Address
- 192.168.1.130
- Suggested Tool Flow (See Instructables link below)
-
- Obtain STL or OBJ model from thingiverse or craft one in modelling software (I like 123d for simple shapes).
- Configure print settings and slice using Slic3r.
- Upload directly from Slic3r to Octoprint.
- Start and monitor print from Octoprint web interface.
- Cancel Print if needed or adjust temperatures on the fly.
- Admire freshly 3d printed object.
Manufacturer
- Manufacturer Website: https://www.lpfrg.com/#
- Support Site : http://creatr.lpfrg.com/support/home
Manual
- Manual: http://creatr.lpfrg.com/support/home#userManual
- Local Copy of Manual: Media:Leapfrog Creatr Manual.pdf