Difference between revisions of "Leapfrog Creatr"

From Hitchin Hackspace
Jump to navigation Jump to search
Line 22: Line 22:
==Slicer Config Files==
==Slicer Config Files==
===Simply3D===
===Simply3D===
Simply3D Leapfrog Creatr Config File: [[Media:File:Leapfrog_Creatr_Simply3D_Config.xml]]
Simply3D Leapfrog Creatr Config File: [[Media:Leapfrog_Creatr_Simply3D_Config.xml]]
 
===PrusaSlicer===
===PrusaSlicer===
===Slic3r===
===Slic3r===

Revision as of 22:18, 26 January 2020

Octoprint Information

Octoprint Web Page
http://hh-octopi-3.local/
IP Address
192.168.1.130
Suggested Tool Flow (See Instructables link below)
  1. Obtain STL or OBJ model from thingiverse or craft one in modelling software (I like 123d for simple shapes).
  2. Configure print settings and slice using Slic3r.
  3. Upload directly from Slic3r to Octoprint.
  4. Start and monitor print from Octoprint web interface.
  5. Cancel Print if needed or adjust temperatures on the fly.
  6. Admire freshly 3d printed object.

Manufacturer

Manual

Slicer Config Files

Simply3D

Simply3D Leapfrog Creatr Config File: Media:Leapfrog_Creatr_Simply3D_Config.xml

PrusaSlicer

Slic3r

RepetierHost

UlimakerCura

Octoprint Printer Profile Data

General
Name = Leapfrog Creatr
Identifier = leapfrog_creatr
Model = Creatr
Printer Bed & Build Volume
Form Factor = Rectangular
Origin = ??????
Heated Bed = Check
Heated Chamber = Un-checked
Print Volume
Bed Width (X) = ???? mm
Bed Depth (Y) = ???? mm
Height (Z) = ???? mm
Custom bounding box = Un-checked
Axes
Define the maximum speed/feedrate of the individual axes.
X = ???? mm/min
Y = ???? mm/min
Z = ???? mm/min
E = ???? mm/min
Hotend & Extruder
Nozzle Diameter = ??? mm
Number of Extruders = 2
Shared nozzle = Un-checked
Offset T1
X = 0 mm
Y = 0 mm

Firmware

Leapfrog Firmware on GitHub
http://github.com/leapfrog3dprinters/