CNC Micro Mill

From Hitchin Hackspace
Revision as of 22:56, 13 January 2022 by Admin (talk | contribs) (added basic info on what it is)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Mill: Axminster Micro Mill model 010061

Power supply: MeanWell SP-500-27, 500w, set at 24V

Stepper drivers: TB6600† * 4 (4 axis capable setup)

Stepper motors: AC570764525M (NEMA 23 size) on X & Y, Z may be different

Interface card: MESA 7176 (on mill backboard) connected to a MESA 5125

2022-01-13 13.19.15.jpg

There's a probe input wired in to a 3.5mm headphone jack on the head of the mill.

The spindle speed/on/off is not CNC controlled

Manual control panel:

2022-01-13 13.24.36.jpg


Accessories:

  • Posilock chuck
  • Posilock collet set 2 x set of 4 collets
  • 4 flute coated end mills, 2, 3, 4, 5, 6mm, 6mm shank
  • Clamp set
  • C spanners
  • Rotary axis
  • Small toolmakers clamp
  • Small machinist's vice
  • Spare/alternative 5125 MESA card

2022-01-12 22.15.08.jpg

Linux CNC:

2022-01-13 14.01.14.jpg


†assumed, matches outwards appearance but part number not visible