Difference between revisions of "Axminster White WD16B Pillar Drill"
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
=Commissioning notes:= | =Commissioning notes:= | ||
* All slide-ways and oiling points oiled with ISO68 Slideway lubricant. | * All slide-ways and oiling points oiled with ISO68 Slideway lubricant. | ||
* Belt tightening mechanism serviced as it had corroded / rusted and didnt work. | |||
* Suspect main quill thrust bearings are shot and need replacing. | |||
=Trained Users= | =Trained Users= |
Revision as of 17:25, 14 May 2022
This tool cannot be operated without completing a training course. |
Documentation
- Local copy of the Axminster WD16B Manual Media:Axminster WD16B Pillar Drill Manual.pdf
Commissioning notes:
- All slide-ways and oiling points oiled with ISO68 Slideway lubricant.
- Belt tightening mechanism serviced as it had corroded / rusted and didnt work.
- Suspect main quill thrust bearings are shot and need replacing.
Trained Users
Technical Specs
- Motor
- 240V 550W
- Speed Range
- 12 Speed 120 - 2580 RPM
- Column Diameter
- 80mm
- Throat
- 178mm
- Max Chuck to Table
- 310mm
- Max Chuck to Base
- 510mm
- Head Turn, Table Turn, Table Swivel
- 360 degrees
- Table Tilt
- 45 deg - 0 deg - 45 deg
- Table Size
- Diameter 310mm
- Chuck Capacity / Type
- 3 - 16mm / Keyless
- Chuck Travel
- 80mm
- Lamp
- Less than or equal to 40W (or equivalent) Edison Screw (ES2)
- Base Size
- 450mm x 270mm
- Overall Dimensions
- 710mm x 350mm x 1015mm
- Weight
- 80kg
- Quill Morse Taper
- MT2
Accessories:
Spares
Location | Spec / Description | No Reqd |
---|---|---|
Motor-Idler | O-625 1106 | 1 |
Idler-Spindle | O-610 1012 | 1 |