Difference between revisions of "CL500M Lathe"

From Hitchin Hackspace
Jump to navigation Jump to search
m
m
Line 9: Line 9:


[https://www.machinemart.co.uk/p/160mm-face-plate/ Faceplate]  Four Way Tool Holder
[https://www.machinemart.co.uk/p/160mm-face-plate/ Faceplate]  Four Way Tool Holder


[[File:JacobsChuck.jpg|300px|Jacobs chuck]][[File:FourJawChuck.jpg|300px|four jaw chuck]]
[[File:JacobsChuck.jpg|300px|Jacobs chuck]][[File:FourJawChuck.jpg|300px|four jaw chuck]]


[https://www.machinemart.co.uk/p/tailstock-chuck/ jacobs chuck]        [https://www.machinemart.co.uk/p/4-jaw-independent-chuck-2/ Four Jaw Chuck]
[https://www.machinemart.co.uk/p/tailstock-chuck/ jacobs chuck]        [https://www.machinemart.co.uk/p/4-jaw-independent-chuck-2/ Four Jaw Chuck]


[[File:ThreeJawChuck.jpg|300px|three jaw chuck]][[File:MachineBlock.jpg|300px|machining block (for milling)]]
[[File:ThreeJawChuck.jpg|300px|three jaw chuck]][[File:MachineBlock.jpg|300px|machining block (for milling)]]


Three Jaw Chuck        [https://www.machinemart.co.uk/p/machine-block/ machining block]
Three Jaw Chuck        [https://www.machinemart.co.uk/p/machine-block/ machining block]


[[File:ThreadingGears.jpg|300px|threading gears, assumed imperial and metric]][[File:TravellingSteady.jpg|300px|Travelling Steady]]
[[File:ThreadingGears.jpg|300px|threading gears, assumed imperial and metric]][[File:TravellingSteady.jpg|300px|Travelling Steady]]


gears metric 14 (0.5-3.0mm pitch) & imperial 20 (11-40 TPI) [https://www.machinemart.co.uk/p/moving-steady-2/ Traveling steady]
gears metric 14 (0.5-3.0mm pitch) & imperial 20 (11-40 TPI) [https://www.machinemart.co.uk/p/moving-steady-2/ Traveling steady]
and [https://www.machinemart.co.uk/p/12pce-t-nut-bolt-set-cl500m/ T nut set]
and [https://www.machinemart.co.uk/p/12pce-t-nut-bolt-set-cl500m/ T nut set]



Revision as of 17:01, 27 May 2019

Lathe is still being commissioned.


instruction manual: [1]

accessories:

Face Platefour way tool holder

Faceplate Four Way Tool Holder


Jacobs chuckfour jaw chuck

jacobs chuck Four Jaw Chuck


three jaw chuckmachining block (for milling)

Three Jaw Chuck machining block


threading gears, assumed imperial and metricTravelling Steady

gears metric 14 (0.5-3.0mm pitch) & imperial 20 (11-40 TPI) Traveling steady

and T nut set


other accessories are shared with the mill and appear on that page.