Difference between revisions of "Creality Ender 5 Pro"
Jump to navigation
Jump to search
(→Manual) |
(→Manual) |
||
Line 38: | Line 38: | ||
* Local Copy of Printer Manual: | * Local Copy of Printer Manual: [https://wiki.hackhitchin.org.uk/images/3/3e/Ender-5_Pro_EN_V.2.3.pdf|Ender 5 Pro User Guide and Assembly Manual] | ||
Use the levelling guide above not the guide in this manual as it is for the Ender 5 without the BLTouch. | |||
==Printer Data== | ==Printer Data== |
Revision as of 09:45, 29 May 2021
Octoprint Information
- Octoprint Web Page Ender 5 Pro 1
- http://hh-octopi-1.local/
- IP Address
- xxx.xxx.xxx.128
- Octoprint Web Page Ender 5 Pro 2
- http://hh-octopi-3.local/
- IP Address
- xxx.xxx.xxx.130
- Suggested Tool Flow
-
- Obtain STL or OBJ model from thingiverse or craft one in modelling software.
- Configure print settings and slice using Slic3r.
- Upload directly from Slic3r to Octoprint.
- Start and monitor print from Octoprint web interface.
- Cancel Print if needed or adjust temperatures on the fly.
- Admire freshly 3d printed object.
Manufacturer
- Manufacturer Website: https://www.creality.com/
- https://www.creality.com/download
Manual
- Local Copy of Bed Levelling Guide: Leveling(1284Pmainboard)instruction(英文)V.1.3.pdf
Use this Manual if you ever need to reset the nozzle offset.
NOTE: As the Ender 5 Pro has a built in BLTouch bed levelling sensor you MUST change the machine settings in your Slicer so that the Start G-Code entry from:
G28 ; Original Home command
to
G28 ; Original Home command G29 ; Home Command that uses BLTouch Bed Levelling
- Local Copy of Printer Manual: 5 Pro User Guide and Assembly Manual
Use the levelling guide above not the guide in this manual as it is for the Ender 5 without the BLTouch.
Printer Data
- Downloadable Source data for printer:
- Additional Octoprint Info
Octoprint Printer Profile Data
- General
- Name = No 1 Ender 5 Pro (No 2 Ender 5 Pro)
- Identifier = no_1_ender_5_pro (no_2_ender_5_pro)
- Model = No 1 Ender 5 Pro (No 2 Ender 5 Pro)
- Printer Bed & Build Volume
- Form Factor = Rectangular
- Origin = Lower Left
- Heated Bed = Check
- Heated Chamber = Un-checked
- Print Volume
- Bed Width (X) = 220mm
- Bed Depth (Y) = 220mm
- Height (Z) = 300mm
- Custom bounding box = Un-checked
- Axes
- Define the maximum speed/feedrate of the individual axes.
- X = 600 mm/min
- Y = 600 mm/min
- Z = 200 mm/min
- E = 300 mm/min
- Hotend & Extruder
- Nozzle Diameter = 0.40 mm
- Number of Extruders = 1
Firmware
- Creality
- Main Board Hardware Version
- https://www.creality.com/download