Difference between revisions of "Lulzbot Taz 4"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
;IP Address | ;IP Address | ||
:192.168.1.129 | :192.168.1.129 | ||
;Suggested Tool Flow | ;Suggested Tool Flow | ||
:# Obtain STL or OBJ model from thingiverse or craft one in modelling software. | :# Obtain STL or OBJ model from thingiverse or craft one in modelling software. | ||
:# Configure print settings and slice using Slic3r. | :# Configure print settings and slice using Slic3r. | ||
Line 13: | Line 13: | ||
==Manufacturer== | ==Manufacturer== | ||
*Manufacturer Website: https://www.lulzbot.com/ | * Manufacturer Website: https://www.lulzbot.com/ | ||
==Manual== | ==Manual== | ||
*Printer Manual: https://download.lulzbot.com/KITTAZ/documentation/manual/Manual.pdf | * Printer Manual: https://download.lulzbot.com/KITTAZ/documentation/manual/Manual.pdf | ||
*Local Copy of Printer Manual:[[Media:TAZ_Lulbotz_4_Manual.pdf]] | * Local Copy of Printer Manual:[[Media:TAZ_Lulbotz_4_Manual.pdf]] | ||
==Printer Data== | ==Printer Data== | ||
*Downloadable Source data for printer: http://download.lulzbot.com/TAZ/4.0/ | * Downloadable Source data for printer: http://download.lulzbot.com/TAZ/4.0/ | ||
==Octoprint Printer Profile Data== | ==Octoprint Printer Profile Data== | ||
;Printer Bed & Build Volume | ;General | ||
: | : Name = TAZ Lulbotz 4 | ||
: | : Identifier = taz_lulbotz_4 | ||
: | : Model = TAZ Lulbotz 4 | ||
: | ; Printer Bed & Build Volume | ||
: | : Form Factor = Rectangular | ||
:: Bed Width (X) | : Origin = Lower Left | ||
:: Bed Depth (Y) | : Heated Bed = Check | ||
:: Height (Z) | : Heated Chamber = Un-checked | ||
: | : Print Volume | ||
;Axes | :: Bed Width (X) = 300mm | ||
: | :: Bed Depth (Y) = 300 mm | ||
:: Height (Z) = 200mm | |||
: Custom bounding box = Un-checked | |||
; Axes | |||
: Define the maximum speed/feedrate of the individual axes. | |||
: X = 9000 mm/min | |||
: Y = 9000 mm/min | |||
: Z = 100 mm/min | |||
: E = 10000 mm/min | |||
; Hot end & Extruder | ; Hot end & Extruder | ||
: | : Nozzle Diameter = 0.35 mm | ||
: | : Number of Extruders = 1 |
Revision as of 22:05, 25 January 2020
Octoprint Information
- Octoprint Web Page
- http://hh-octopi-2.local/
- IP Address
- 192.168.1.129
- Suggested Tool Flow
-
- Obtain STL or OBJ model from thingiverse or craft one in modelling software.
- Configure print settings and slice using Slic3r.
- Upload directly from Slic3r to Octoprint.
- Start and monitor print from Octoprint web interface.
- Cancel Print if needed or adjust temperatures on the fly.
- Admire freshly 3d printed object.
Manufacturer
- Manufacturer Website: https://www.lulzbot.com/
Manual
- Local Copy of Printer Manual:Media:TAZ_Lulbotz_4_Manual.pdf
Printer Data
- Downloadable Source data for printer: http://download.lulzbot.com/TAZ/4.0/
Octoprint Printer Profile Data
- General
- Name = TAZ Lulbotz 4
- Identifier = taz_lulbotz_4
- Model = TAZ Lulbotz 4
- Printer Bed & Build Volume
- Form Factor = Rectangular
- Origin = Lower Left
- Heated Bed = Check
- Heated Chamber = Un-checked
- Print Volume
- Bed Width (X) = 300mm
- Bed Depth (Y) = 300 mm
- Height (Z) = 200mm
- Custom bounding box = Un-checked
- Axes
- Define the maximum speed/feedrate of the individual axes.
- X = 9000 mm/min
- Y = 9000 mm/min
- Z = 100 mm/min
- E = 10000 mm/min
- Hot end & Extruder
- Nozzle Diameter = 0.35 mm
- Number of Extruders = 1