Difference between revisions of "Lulzbot Taz 4"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
==Octoprint Information== | ==Octoprint Information== | ||
;Octoprint Web Page | ;Octoprint Web Page | ||
:http://hh-octopi- | :http://hh-octopi-1.local/ | ||
;IP Address | ;IP Address | ||
:xxx.xxx.xxx.129 | :xxx.xxx.xxx.129 |
Revision as of 18:59, 13 June 2021
Octoprint Information
- Octoprint Web Page
- http://hh-octopi-1.local/
- IP Address
- xxx.xxx.xxx.129
- Suggested Tool Flow
-
- Obtain STL or OBJ model from thingiverse or craft one in modelling software.
- Configure print settings and slice using Slic3r.
- Upload directly from Slic3r to Octoprint.
- Start and monitor print from Octoprint web interface.
- Cancel Print if needed or adjust temperatures on the fly.
- Admire freshly 3d printed object.
Manufacturer
- Manufacturer Website: https://www.lulzbot.com/
Manual
- Local Copy of Printer Manual:Media:TAZ_Lulbotz_4_Manual.pdf
Printer Data
- Downloadable Source data for printer: http://download.lulzbot.com/TAZ/4.0/
- Additional Octoprint Info https://learn.adafruit.com/octoprint-open-source-host-software/configuring-octoprint-for-lulzbot-taz
Octoprint Printer Profile Data
- General
- Name = TAZ Lulzbot 4
- Identifier = taz_lulzbot_4
- Model = TAZ Lulzbot 4
- Printer Bed & Build Volume
- Form Factor = Rectangular
- Origin = Lower Left
- Heated Bed = Check
- Heated Chamber = Un-checked
- Print Volume
- Bed Width (X) = 300mm
- Bed Depth (Y) = 300mm
- Height (Z) = 200mm
- Custom bounding box = Un-checked
- Axes
- Define the maximum speed/feedrate of the individual axes.
- X = 600 mm/min
- Y = 600 mm/min
- Z = 200 mm/min
- E = 300 mm/min
- Hotend & Extruder
- Nozzle Diameter = 0.35 mm
- Number of Extruders = 1
Firmware
- Marlin
- http://download.lulzbot.com/TAZ/4.0/software/current/firmware/Marlin/Marlin_TAZ4_1.0.0.1/Marlin/ (Source Code)
- http://download.lulzbot.com/TAZ/4.0/software/current/firmware/Marlin/Marlin_TAZ4_1.0.0.1.hex (Hex Code)
- https://marlinfw.org/ (Marlin Master)