Lulzbot Taz 4

From Hitchin Hackspace
Revision as of 20:48, 25 January 2020 by Mike (talk | contribs) (→‎Manual)
Jump to navigation Jump to search

Octoprint Information

Octoprint Web Page
http://hh-octopi-2.local/
IP Address
192.168.1.129
Suggested Tool Flow
  1. Obtain STL or OBJ model from thingiverse or craft one in modelling software.
  2. Configure print settings and slice using Slic3r.
  3. Upload directly from Slic3r to Octoprint.
  4. Start and monitor print from Octoprint web interface.
  5. Cancel Print if needed or adjust temperatures on the fly.
  6. Admire freshly 3d printed object.

Manufacturer

Manual

Printer Data