Lulzbot Taz 4

From Hitchin Hackspace
Jump to navigation Jump to search

Octoprint Information

Octoprint Web Page
http://hh-octopi-2.local/
IP Address
192.168.1.129
Suggested Tool Flow
  1. Obtain STL or OBJ model from thingiverse or craft one in modelling software.
  2. Configure print settings and slice using Slic3r.
  3. Upload directly from Slic3r to Octoprint.
  4. Start and monitor print from Octoprint web interface.
  5. Cancel Print if needed or adjust temperatures on the fly.
  6. Admire freshly 3d printed object.

Manufacturer

Manual

Printer Data

Octoprint Printer Profile Data

General
Name = TAZ Lulzbot 4
Identifier = taz_lulzbot_4
Model = TAZ Lulzbot 4
Printer Bed & Build Volume
Form Factor = Rectangular
Origin = Lower Left
Heated Bed = Check
Heated Chamber = Un-checked
Print Volume
Bed Width (X) = 300mm
Bed Depth (Y) = 300 mm
Height (Z) = 200mm
Custom bounding box = Un-checked
Axes
Define the maximum speed/feedrate of the individual axes.
X = 9000 mm/min
Y = 9000 mm/min
Z = 100 mm/min
E = 10000 mm/min
Hotend & Extruder
Nozzle Diameter = 0.35 mm
Number of Extruders = 1

Firmware

Marlin


http://download.lulzbot.com/TAZ/4.0/software/current/firmware/Marlin/Marlin_TAZ4_1.0.0.1/Marlin/ (Source Code)
http://download.lulzbot.com/TAZ/4.0/software/current/firmware/Marlin/Marlin_TAZ4_1.0.0.1.hex (Hex Code)
https://marlinfw.org/ (Marlin Master)