|This tool cannot be operated without completing a training course.
|If required we can provide an introduction to the safe use of this tool.
|DRAFT INSTRUCTION - WORK IN PROGRESS
|WARNING: Risk of serious cut injuries, entanglement with rotating parts!
|DO NOT, under any circumstances, put your hands or fingers anywhere near the blade or cutter when the machine is running.
|ALWAYS use a pusher stick or pusher pads when feeding material through this machine.
Training requirements Template
See template files at top of page
Safety information / minimum required PPE Graphics
See Graphics for HSE Signage above
Safety information / minimum required PPE Details
For Operator safety this tool should be used mounted on the Clarke Workshop Stand
- Manufacturer: Performance
- Model Number / Part Number: FMTC10TS
- Power rating =
- Voltage =
- Current =
- Speed =
- Dimensions =
- Any relevant statistics =
- Depth of Cut - Blade 90deg = 80mm
- Depth of Cut - Blade 45deg = 55mm
- Blade Size - 254mm x 2.8mm x 1.8mm
- Blade Bore Size - 30mm
- For large machines this is not required.
- For small tools e.g. the belt sander identify where the tool is stored.
- Links to videos for training
- Training documentation
Manuals / Documentation
Provide details of where Manufacturer manuals or electronic documentation can be found.
Online / Digital Documentation
Links to any online documentation or PDFs of manuals
Hardcopy / Paper Documentation Location
Manual in Manuals folder
Any useful pictures of the machine
General Operating Procedure
Describe how to:
- Safety checks before starting.
- Turn the machine on
- Operating procedures
- Turning the machine off.
- Cleaning after use.
- State machine should be left / put back in to storage.
Can be broken down in to sub sections
Cedric's comment on the Usage of the table saw
Sub Section 2
Sub Section 3
Sub Section 4
Maintenance requirements and schedule
Detail routine maintenance steps and schedules
Detail consumables and spare parts. Drive belts, specific lubricants, blades, cutters.
Detail spares stored in the hackspace and where they are located.
Details of any spares suppliers or consumables suppliers e.g. specific blades or cutters for machines (bandsaw blades, circular saw blades)