Template:ToolInfoTemplate

From Hitchin Hackspace
Jump to navigation Jump to search


This tool cannot be operated without completing a training course.
If required we can provide an introduction to the safe use of this tool.
DRAFT INSTRUCTION - WORK IN PROGRESS
This Equipment is Obsolete and is no longer available. It has been retired, sold or superseded.
This Policy, Document or Page is Under Discussion and is not formally implemented yet.
Do not touch when in use Do not turn off Do not wear loose clothing while operating this machine Do not wear gloves operating this machine
Disconnect before carrying out maintenance or repair Disconnect mains plug from electrical outlet Switch off when not in use Switch off and remove plug from socket when not in use Guards must be used at all times Use guard Safety gloves must be worn Wear protective gloves Wear ear protectors Eye protection must be worn
Wear face shield Wear face guard Wear a welding mask Wear helmet while welding Wear a mask Wear face mask Wear respiratory protection Protective footwear must be worn Wear safety footwear
Caution laser beam Laser in operation Counter-rotating rollers Rotating machinery Beware of moving parts Machine may start automatically or unexpectedly Crushing of hands Crushing of hands - press brake Crushing of hands - press brake hand trap Sharp elements Out Of Order Hot Surface Hot Parts


WARNING: Risk of serious cut injuries, entanglement with rotating parts!
DO NOT, under any circumstances, put your hands or fingers anywhere near the blade or cutter when the machine is running.
ALWAYS use a pusher stick or pusher pads when feeding material through this machine.


Equipment Image

Placeholder Image - Replace with a photograph of the machine in situ or set up for use


Training requirements Template

See template files at top of page

Safety information / minimum required PPE Graphics

See Graphics for HSE Signage above

Safety information / minimum required PPE Details

Machine name/identifier

  • Manufacturer: <Manufacturers name>
  • Model Number / Part Number: <Manufacturers model name / Part Number>

Machine Capacity

  • Power rating =
  • Voltage =
  • Current =
  • Speed =
  • Dimensions =
  • Any relevant statistics =


Location

  • For large machines this is not required.
  • For small tools e.g. the belt sander identify where the tool is stored.

Training Materials

  • Links to videos for training
  • Training documentation

Manuals / Documentation

Provide details of where Manufacturer manuals or electronic documentation can be found.

Online / Digital Documentation

Links to any online documentation or PDFs of manuals

Hardcopy / Paper Documentation Location

Identify where hard copies of manuals are located in the hackspace.

Pictures

Any useful pictures of the machine

General Operating Procedure

Describe how to:

  • Safety checks before starting.
  • Turn the machine on
  • Operating procedures
  • Turning the machine off.
  • Cleaning after use.
  • State machine should be left / put back in to storage.

Can be broken down in to sub sections

Sub Section 1

Sub Section 2

Sub Section 3

Sub Section 4

Maintenance requirements and schedule

Detail routine maintenance steps and schedules

Every use

Daily

Weekly

Monthly

6 Monthly

Annual

Spares Information

Detail consumables and spare parts. Drive belts, specific lubricants, blades, cutters.

Hackspace Spares

Detail spares stored in the hackspace and where they are located.

Spares Sources

Details of any spares suppliers or consumables suppliers e.g. specific blades or cutters for machines (bandsaw blades, circular saw blades)