Difference between revisions of "Tools"
Jump to navigation
Jump to search
Markmellors (talk | contribs) |
Markmellors (talk | contribs) (added welder and grinder links) |
||
Line 1: | Line 1: | ||
== Hackspace Owned Equipment == | == Hackspace Owned Equipment == | ||
*Mig welder | *[Mig welder] | ||
*Angle grinder | *[Angle grinder] | ||
*2 Channel Oscilloscope | *2 Channel Oscilloscope | ||
*Soldering Iron x 3 | *Soldering Iron x 3 |
Revision as of 16:03, 1 September 2018
Hackspace Owned Equipment
- [Mig welder]
- [Angle grinder]
- 2 Channel Oscilloscope
- Soldering Iron x 3
- Multimeter (Holdpeak 90EPD with bluetooth for remote reading)
- Thurlby 0-30V 2A Bench PSU
- Arduino controlled robot
- Laser Cutter
- Hot Melt Glue Guns (x2)
- Red/Blue/Yellow Ratchet Terminal Crimp Tool
- Several sets of Jewellers screwdrivers
- Box of small hand tools (pliers, screwdrivers, tweezers, etc)
- Tape Measures
- Small Fridge (currently in "Hackspace offsite storage")
- Toaster (currently in "Hackspace offsite storage")
- 10 Ikea Gunde folding chairs(currently in "Hackspace offsite storage")
- 3 x Thurlby dual output 2A bench PSUs, 0-30V (maybe 32V?)
- 1 x dual output 35V 2A bench PSU, TTi PSS3502A
- 2 x electronic calipers
- Lulzbot Taz 4 3D printer (currently off-site due to lack of space in Ransom's to store/use it)
- Makita 6834 screw gun, 240V
- Multifunction ladders, 3.7m
Personally Owned Equipment members are willing to allow other members to have access to
- 'Up Plus 2' 3d printer (Mark M)
- Wood turning lathe (Mark M)
- Mains powered wood router (Mark M)
- Mains powered jigsaw (Mark M)(Mike)
- Mains powered Detail Sander (Triangle head) (Mike)
- Mains powered Sander (Mike)
- Electric plane (Mark M)(Mike)
- Dremel (Mark M)
- Orbital sander (Mark M)
- Angle grinder (Mark M)(Mike)
- Sliding compound mitre saw (Rich)
- Heat gun (Rich)(Mike)
- Pillar drill (Rich)
- 650W 2 stroke mains generator (Mike)
- Selection of Torque Wrenches 1/2"drive (10Nm up) (Mike)
Equipment members have access to
- Larger bed Laser cutter (Mark M, via Cambridge Makespace)
- CNC router (Mark M, via Cambridge Makespace)
- CNC router (Paul B, via his shed!)
- 3D Printer (Paul B, via his shed!)