Difference between revisions of "Tools"
Jump to navigation
Jump to search
(22 intermediate revisions by 2 users not shown) | |||
Line 14: | Line 14: | ||
*Soldering Iron x 3 | *Soldering Iron x 3 | ||
====Electronic/Electrical Hand tools==== | ====Electronic/Electrical Hand tools==== | ||
*Arduino controlled robot | * Arduino controlled robot | ||
*Red/Blue/Yellow Ratchet Terminal Crimp Tool | * Red/Blue/Yellow Ratchet Terminal Crimp Tool | ||
*Several sets of Jewellers screwdrivers | * Several sets of Jewellers screwdrivers | ||
*Box of small hand tools (pliers, screwdrivers, tweezers, etc) | * Box of small hand tools (pliers, screwdrivers, tweezers, etc) | ||
* Box of ''Right-to-Repair'' tools go gain access to domestic electronics and electrical devices. | |||
=== Labspace / General=== | === Labspace / General=== | ||
====[[Laser Cutter]]==== | |||
* Lulzbot Taz 4 3D printer | * Just Add Sharks A3 Laser Cutter | ||
* Leapfrog Creatr dual-head 3D printer | |||
* Hot Melt Glue Guns (x2) | ====3D Printers==== | ||
* Printer 1 [[Lulzbot Taz 4]] 3D printer | |||
* Printer 2 [[Creality Ender 5 Pro]] 3D printer | |||
* Printer 3 [[Creality Ender 5 Pro]] 3D printer | |||
* [[Available 3D Printing Materials]] | |||
=====Archived Printer Settings===== | |||
* [[CTC FF Creator]] dual-head 3D printer | |||
* [[Leapfrog Creatr]] dual-head 3D printer | |||
====Other Tools==== | |||
* Hot Melt Glue Guns (x2). | |||
====Printers==== | |||
; Hewlett Packard LJ2200 | |||
: Black and White Laser Printer | |||
: Network enabled | |||
: Hostname: hacky_printer | |||
: IP Address xxx.xxx.xxx.140 | |||
; Brother HL-3150CDW | |||
: Colour Laser Printer | |||
: Network enabled Ethernet and wifi | |||
: Cable Hostname: | |||
: IP Address xxx.xxx.xxx.141 | |||
: Wifi Hostname: | |||
: IP Address xxx.xxx.xxx.142 | |||
===Metrology=== | ===Metrology=== | ||
* Tape Measures | * Tape Measures | ||
* | * 3 x 150mm Digital Vernier Calipers | ||
* 1 x Digital Angle Gauge | |||
* 1 x Basic Angle / Protractor / Depth Gauge | |||
* 7 x 1" Micrometer | |||
* 1 x 1" - 2" Micrometer | |||
* 1 x 3" - 4" Micrometer | |||
* 1 x 4" - 5" Micrometer (including check bar) | |||
* 1 x 25mm - 50mm Micrometer | |||
* 1 x 50mm - 75mm Micrometer | |||
* 1 x 1/4" - 3/4" Bore gauge | |||
* 1 x 25mm - 30mm Bore gauge | |||
* 1 x 35mm - 40mm Bore gauge | |||
* 1 x 50mm - 55mm Bore gauge | |||
* 1 x 0.25" 10,000 DTI Gauge | |||
* 1 x 0.25" 0.0001" DTI Gauge | |||
* 1 x 1" 0.001" DTI Gauge | |||
* 1 x 1" / 2" / 3" Depth Gauge | |||
* 1 x Feeler Gauge Set | |||
=== Workshop - Mechanical / Metal=== | === Workshop - Mechanical / Metal=== | ||
====Machine Tools==== | ====Machine Tools==== | ||
*[[CL500M Lathe]] | *[[CL500M Lathe]] | ||
*[[ZX25M mill]] | *[[ZX25M mill]] | ||
*[[Kerrys Super 8 Pillar Drill]] | |||
*[[Axminster White WD16B Pillar Drill]] | |||
====Power Tools==== | ====Power Tools==== | ||
*[[Mig welder]] | *[[Mig welder]] | ||
Line 46: | Line 95: | ||
:* Out of production | :* Out of production | ||
:* Manual in Manuals folder | :* Manual in Manuals folder | ||
;Electra Beckum BAS 315/4 GWN 55 Band Saw | |||
:Capacity | |||
:* Throat Width = 305mm | |||
:* Max Cutting Height = 160mm | |||
:* Sawtable Size = 400mm x 548mm | |||
:* Sawtable Tilt = 0deg - 45deg (to Right) | |||
:* Sawtable Height from floor on stand = 1100mm | |||
:* Cutting Speed = 370, 800 m per min | |||
:* Saw Blade width = 6 - 15mm | |||
:* Saw Blade length = 2240mm | |||
:; Caution | |||
:: ONLY TRAINED USERS ARE TO CHANGE THE SAW BLADE | |||
:Manual in Manuals folder | |||
: Spares https://www.bedfordsaw.co.uk/spare-parts-for-elektra-beckum-bandsaws | |||
;Rexon SS16SA Scroll Saw | ;Rexon SS16SA Scroll Saw | ||
:Capacity | :Capacity | ||
Line 58: | Line 121: | ||
:: Scroll saw blades, generally, stay sharp for 30 min - 2 hours. | :: Scroll saw blades, generally, stay sharp for 30 min - 2 hours. | ||
:Manual in Manuals folder | :Manual in Manuals folder | ||
: Spares https://www.rexonspares.co.uk/ | |||
;Rexon 8" Drill Press | ;Rexon 8" Drill Press | ||
:Capacity | :Capacity | ||
Line 69: | Line 133: | ||
:* Speed Range = 515, 915, 1430, 1950, 2580 RPM | :* Speed Range = 515, 915, 1430, 1950, 2580 RPM | ||
: Manual in Manuals folder | : Manual in Manuals folder | ||
;Performance FMTC10TS 254mm Table Saw | ;Performance FMTC10TS 254mm Table Saw | ||
:Capacity | :Capacity | ||
Line 90: | Line 153: | ||
====Power Tools==== | ====Power Tools==== | ||
* Aldi Workzone telescopic rotary sander. | * Aldi Workzone telescopic rotary sander. | ||
* Biscuit Jointer | |||
====Hand Tools==== | ====Hand Tools==== | ||
=== Kitchen === | === Kitchen === | ||
Line 102: | Line 167: | ||
===DIY / Building Tools=== | ===DIY / Building Tools=== | ||
*[https://www.ebay.co.uk/itm/3-7M-Multi-Function-14-in-1-Aluminium-Ladder-with-Free-2-Plates-and-1-Tool-Tray-/131512974155?_trksid=p2385738.m2548.l4275 Multifunction ladders, 3.7m] | *[https://www.ebay.co.uk/itm/3-7M-Multi-Function-14-in-1-Aluminium-Ladder-with-Free-2-Plates-and-1-Tool-Tray-/131512974155?_trksid=p2385738.m2548.l4275 Multifunction ladders, 3.7m] | ||
* Plasterboard lift. | * Plasterboard lift. (out on loan to PB) | ||
== Personally Owned Equipment members are willing to allow other members to have access to == | == Personally Owned Equipment members are willing to allow other members to have access to == | ||
Line 128: | Line 192: | ||
*CNC router (Paul B, via his shed!) | *CNC router (Paul B, via his shed!) | ||
*3D Printer (Paul B, via his shed!) | *3D Printer (Paul B, via his shed!) | ||
[[Category:Hackspace]] | |||
[[Category:Equipment]] | |||
[[Category:Power Tools]] | |||
[[Category:Metal Working]] | |||
[[Category:Wood Working]] | |||
[[Category:Laser Cutter]] | |||
[[Category:3D Printing]] | |||
[[Category:Risk Assessment]] | |||
[[Category:Health and Safety]] | |||
[[Category:Procedures]] | |||
[[Category:Training]] | |||
[[Category:Maintenance]] | |||
[[Category:Information Resources]] | |||
[[Category:Materials Information]] | |||
[[Category:Workshop]] |
Revision as of 16:06, 21 August 2021
Tool Wish / Shopping List
Hackspace Tools Wish List Spreadsheet (Google docs) Please update with any tool purchases or donations.
Hackspace Owned Equipment
Electronic
Test Instruments
- 2 Channel Oscilloscope
- Multimeter (Holdpeak 90EPD with bluetooth for remote reading)
Power Supplies
- Thurlby 0-30V 2A Bench PSU
- 3 x Thurlby dual output 2A bench PSUs, 0-30V (maybe 32V?)
- 1 x dual output 35V 2A bench PSU, TTi PSS3502A
Soldering Equipment
- Soldering Iron x 3
Electronic/Electrical Hand tools
- Arduino controlled robot
- Red/Blue/Yellow Ratchet Terminal Crimp Tool
- Several sets of Jewellers screwdrivers
- Box of small hand tools (pliers, screwdrivers, tweezers, etc)
- Box of Right-to-Repair tools go gain access to domestic electronics and electrical devices.
Labspace / General
Laser Cutter
- Just Add Sharks A3 Laser Cutter
3D Printers
- Printer 1 Lulzbot Taz 4 3D printer
- Printer 2 Creality Ender 5 Pro 3D printer
- Printer 3 Creality Ender 5 Pro 3D printer
- Available 3D Printing Materials
Archived Printer Settings
- CTC FF Creator dual-head 3D printer
- Leapfrog Creatr dual-head 3D printer
Other Tools
- Hot Melt Glue Guns (x2).
Printers
- Hewlett Packard LJ2200
- Black and White Laser Printer
- Network enabled
- Hostname: hacky_printer
- IP Address xxx.xxx.xxx.140
- Brother HL-3150CDW
- Colour Laser Printer
- Network enabled Ethernet and wifi
- Cable Hostname:
- IP Address xxx.xxx.xxx.141
- Wifi Hostname:
- IP Address xxx.xxx.xxx.142
Metrology
- Tape Measures
- 3 x 150mm Digital Vernier Calipers
- 1 x Digital Angle Gauge
- 1 x Basic Angle / Protractor / Depth Gauge
- 7 x 1" Micrometer
- 1 x 1" - 2" Micrometer
- 1 x 3" - 4" Micrometer
- 1 x 4" - 5" Micrometer (including check bar)
- 1 x 25mm - 50mm Micrometer
- 1 x 50mm - 75mm Micrometer
- 1 x 1/4" - 3/4" Bore gauge
- 1 x 25mm - 30mm Bore gauge
- 1 x 35mm - 40mm Bore gauge
- 1 x 50mm - 55mm Bore gauge
- 1 x 0.25" 10,000 DTI Gauge
- 1 x 0.25" 0.0001" DTI Gauge
- 1 x 1" 0.001" DTI Gauge
- 1 x 1" / 2" / 3" Depth Gauge
- 1 x Feeler Gauge Set
Workshop - Mechanical / Metal
Machine Tools
Power Tools
Hand Tools
Workshop - Wood
Machine Tools
- Record CL3-36 Wood Lathe
- CL3 Manual
- Multistar Titan Compact Chuck
- Out of production
- https://www.woodworkersinstitute.com/wood-turning/kit-tools/ancillary-equipment/chucks/multistar-titan/
- Manual in Manuals folder
- Multistar Titan Chuck Accessory - Expanding Mandrel
- Out of production
- Manual in Manuals folder
- Electra Beckum BAS 315/4 GWN 55 Band Saw
- Capacity
- Throat Width = 305mm
- Max Cutting Height = 160mm
- Sawtable Size = 400mm x 548mm
- Sawtable Tilt = 0deg - 45deg (to Right)
- Sawtable Height from floor on stand = 1100mm
- Cutting Speed = 370, 800 m per min
- Saw Blade width = 6 - 15mm
- Saw Blade length = 2240mm
- Caution
- ONLY TRAINED USERS ARE TO CHANGE THE SAW BLADE
- Manual in Manuals folder
- Spares https://www.bedfordsaw.co.uk/spare-parts-for-elektra-beckum-bandsaws
- Rexon SS16SA Scroll Saw
- Capacity
- Throat = 400mm
- Max Cutting Height = 50mm
- Table Tilt = 0deg - 45deg (to Left)
- Blade Length = 127mm (5")
- Cutting Speed = 800, 1400 per min
- Blade Stroke = 19mm (3/4")
- Caution
- This machine has all Imperial fasteners. Not Metric!
- Scroll saw blades, generally, stay sharp for 30 min - 2 hours.
- Manual in Manuals folder
- Spares https://www.rexonspares.co.uk/
- Rexon 8" Drill Press
- Capacity
- Throat = 203mm (8")
- Max Cutting Height = 50mm
- Spindle Travel = 50mm
- Spindle Taper = B16
- Chuck Capacity (Taper) = 13mm (1/2") (B16)
- Maximum Drill Diameter = 13mm
- Number of Speeds = 5
- Speed Range = 515, 915, 1430, 1950, 2580 RPM
- Manual in Manuals folder
- Performance FMTC10TS 254mm Table Saw
- Capacity
- Depth of Cut - Blade 90deg = 80mm
- Depth of Cut - Blade 45deg = 55mm
- Blade Size - 254mm x 2.8mm x 1.8mm
- Blade Bore Size - 30mm
- Manual in Manuals folder
- Power-G Router Table
- No Manual - Believe it is an Aldi/Lidl device.
- Fitted with Bosch POF500A Router
- Capacity
- Power = 500W
- No-Load Speed = 2700RPM
- Collet = 6mm dia
- Collet Special Accessory can provide 1/4" an 8mm dia (we dont have this currently)
- Stroke = 52mm
- Manual in Manuals folder
- Capacity
Power Tools
- Aldi Workzone telescopic rotary sander.
- Biscuit Jointer
Hand Tools
Kitchen
- Small Fridge
- Toaster
- Hot Water Urn
- Kettle
- Jura Impress A9 Bean to Cup Coffee Machine User Manual
- Microwave Oven (800W)
- 10 Ikea Gunde folding chairs(currently in Hackspace Loft storage)
DIY / Building Tools
- Multifunction ladders, 3.7m
- Plasterboard lift. (out on loan to PB)
Personally Owned Equipment members are willing to allow other members to have access to
- 'Up Plus 2' 3d printer (Mark M)
- Small Wood turning lathe (driven by electric drill)(Mark M)
- Mains powered wood router (Mark M)
- Mains powered jigsaw (Mark M)(Mike)
- Mains powered Detail Sander (Triangle head) (Mike)
- Mains powered Sander (Mike)
- Electric plane (Mark M)(Mike)
- Dremel (Mark M)
- Orbital sander (Mark M)
- Angle grinder (Mark M)(Mike)
- Sliding compound mitre saw (Rich)
- Heat gun (Rich)(Mike)
- Pillar drill (Rich)
- 650W 2 stroke mains generator (Mike)
- Selection of Torque Wrenches 1/2"drive (10Nm up) (Mike)
- Bicycle Repair Workshop stand (Mike)
Equipment members have access to
- Larger bed Laser cutter (Mark M, via Cambridge Makespace)
- CNC router (Mark M, via Cambridge Makespace)
- CNC router (Paul B, via his shed!)
- 3D Printer (Paul B, via his shed!)