Difference between revisions of "Tools"
Jump to navigation
Jump to search
(→Hackspace Owned Equipment: Add details od Dave's Mates contributions / Donations) |
|||
| Line 12: | Line 12: | ||
*Small Fridge (currently in "Hackspace offsite storage") | *Small Fridge (currently in "Hackspace offsite storage") | ||
*Toaster (currently in "Hackspace offsite storage") | *Toaster (currently in "Hackspace offsite storage") | ||
* 10 [http://www.ikea.com/gb/en/catalog/products/60217799/ Ikea Gunde folding chairs](currently in "Hackspace offsite storage") | *10 [http://www.ikea.com/gb/en/catalog/products/60217799/ Ikea Gunde folding chairs](currently in "Hackspace offsite storage") | ||
*3 x Thurlby dual output 2A bench PSUs, 0-30V (maybe 32V?) | |||
*1 x dual output 35V 2A bench PSU, TTi PSS3502A | |||
== Personally Owned Equipment members are willing to allow other members to have access to == | == Personally Owned Equipment members are willing to allow other members to have access to == | ||
Revision as of 09:08, 24 August 2015
Hackspace Owned Equipment
- 2 Channel Oscilloscope
- Soldering Iron
- Thurlby 0-30V 2A Bench PSU
- Arduino controlled robot
- Laser Proposal
- Hot Melt Glue Guns (x2)
- Red/Blue/Yellow Ratchet Terminal Crimp Tool
- Several sets of Jewellers screwdrivers
- Tape Measures
- Small Fridge (currently in "Hackspace offsite storage")
- Toaster (currently in "Hackspace offsite storage")
- 10 Ikea Gunde folding chairs(currently in "Hackspace offsite storage")
- 3 x Thurlby dual output 2A bench PSUs, 0-30V (maybe 32V?)
- 1 x dual output 35V 2A bench PSU, TTi PSS3502A
Personally Owned Equipment members are willing to allow other members to have access to
- 'Up Plus 2' 3d printer (Mark M)
- Wood turning lathe (Mark M)
- Mains powered wood router (Mark M)
- Mains powered jigsaw (Mark M)(Mike)
- Mains powered Detail Sander (Triangle head) (Mike)
- Mains powered Sander (Mike)
- Electric plane (Mark M)(Mike)
- Dremel (Mark M)
- Orbital sander (Mark M)
- Angle grinder (Mark M)(Mike)
- Sliding compound mitre saw (Rich)
- Heat gun (Rich)(Mike)
- Pillar drill (Rich)
- 650W 2 stroke mains generator (Mike)
- Selection of Torque Wrenches 1/2"drive (10Nm up) (Mike)
Equipment members have access to
- Laser cutter (Mark M, via Cambridge Makespace)
- CNC router (Mark M, via Cambridge Makespace)
- CNC router (Paul B, via his shed!)
- 3D Printer (Paul B, via his shed!)