From Hitchin Hackspace
Jump to navigation Jump to search

Tool Wish / Shopping List

Hackspace Tools Wish List Spreadsheet (Google docs) Please update with any tool purchases or donations.

Hackspace Owned Equipment


Test Instruments

  • 2 Channel Oscilloscope
  • Multimeter (Holdpeak 90EPD with bluetooth for remote reading)

Power Supplies

  • Thurlby 0-30V 2A Bench PSU
  • 3 x Thurlby dual output 2A bench PSUs, 0-30V (maybe 32V?)
  • 1 x dual output 35V 2A bench PSU, TTi PSS3502A

Soldering Equipment

  • Soldering Iron x 3

Electronic/Electrical Hand tools

  • Arduino controlled robot
  • Red/Blue/Yellow Ratchet Terminal Crimp Tool
  • Several sets of Jewellers screwdrivers
  • Box of small hand tools (pliers, screwdrivers, tweezers, etc)

Labspace / General

Laser Cutter

  • Just Add Sharks A3 Laser Cutter

3D Printers

Archived Printer Settings

Other Tools

  • Hot Melt Glue Guns (x2).


Hewlett Packard LJ2200
Black and White Laser Printer
Network enabled
Hostname: hacky_printer
IP Address
Brother HL-3150CDW
Colour Laser Printer
Network enabled Ethernet and wifi
Cable Hostname:
IP Address
Wifi Hostname:
IP Address


  • Tape Measures
  • 2 x Digital Vernier calipers

Workshop - Mechanical / Metal

Machine Tools

Power Tools

Hand Tools

Workshop - Wood

Machine Tools

Record CL3-36 Wood Lathe
CL3 Manual
Multistar Titan Compact Chuck
Multistar Titan Chuck Accessory - Expanding Mandrel
  • Out of production
  • Manual in Manuals folder
Electra Beckum BAS 315/4 GWN 55 Band Saw
  • Throat Width = 305mm
  • Max Cutting Height = 160mm
  • Sawtable Size = 400mm x 548mm
  • Sawtable Tilt = 0deg - 45deg (to Right)
  • Sawtable Height from floor on stand = 1100mm
  • Cutting Speed = 370, 800 m per min
  • Saw Blade width = 6 - 15mm
  • Saw Blade length = 2240mm
Manual in Manuals folder
Rexon SS16SA Scroll Saw
  • Throat = 400mm
  • Max Cutting Height = 50mm
  • Table Tilt = 0deg - 45deg (to Left)
  • Blade Length = 127mm (5")
  • Cutting Speed = 800, 1400 per min
  • Blade Stroke = 19mm (3/4")
This machine has all Imperial fasteners. Not Metric!
Scroll saw blades, generally, stay sharp for 30 min - 2 hours.
Manual in Manuals folder
Rexon 8" Drill Press
  • Throat = 203mm (8")
  • Max Cutting Height = 50mm
  • Spindle Travel = 50mm
  • Spindle Taper = B16
  • Chuck Capacity (Taper) = 13mm (1/2") (B16)
  • Maximum Drill Diameter = 13mm
  • Number of Speeds = 5
  • Speed Range = 515, 915, 1430, 1950, 2580 RPM
Manual in Manuals folder
Performance FMTC10TS 254mm Table Saw
  • Depth of Cut - Blade 90deg = 80mm
  • Depth of Cut - Blade 45deg = 55mm
  • Blade Size - 254mm x 2.8mm x 1.8mm
  • Blade Bore Size - 30mm
Manual in Manuals folder
Power-G Router Table
No Manual - Believe it is an Aldi/Lidl device.
Fitted with Bosch POF500A Router
  • Power = 500W
  • No-Load Speed = 2700RPM
  • Collet = 6mm dia
  • Collet Special Accessory can provide 1/4" an 8mm dia (we dont have this currently)
  • Stroke = 52mm
Manual in Manuals folder

Power Tools

  • Aldi Workzone telescopic rotary sander.
  • Biscuit Jointer

Hand Tools


DIY / Building Tools

Personally Owned Equipment members are willing to allow other members to have access to

  • 'Up Plus 2' 3d printer (Mark M)
  • Small Wood turning lathe (driven by electric drill)(Mark M)
  • Mains powered wood router (Mark M)
  • Mains powered jigsaw (Mark M)(Mike)
  • Mains powered Detail Sander (Triangle head) (Mike)
  • Mains powered Sander (Mike)
  • Electric plane (Mark M)(Mike)
  • Dremel (Mark M)
  • Orbital sander (Mark M)
  • Angle grinder (Mark M)(Mike)
  • Sliding compound mitre saw (Rich)
  • Heat gun (Rich)(Mike)
  • Pillar drill (Rich)
  • 650W 2 stroke mains generator (Mike)
  • Selection of Torque Wrenches 1/2"drive (10Nm up) (Mike)
  • Bicycle Repair Workshop stand (Mike)

Equipment members have access to

  • Larger bed Laser cutter (Mark M, via Cambridge Makespace)
  • CNC router (Mark M, via Cambridge Makespace)
  • CNC router (Paul B, via his shed!)
  • 3D Printer (Paul B, via his shed!)