Tools

From Hitchin Hackspace
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tool Wish / Shopping List

Hackspace Tools Wish List Spreadsheet (Google docs) Please update with any tool purchases or donations.

Hackspace Owned Equipment

Electronic

Test Instruments

  • 2 Channel Oscilloscope
  • Multimeter (Holdpeak 90EPD with bluetooth for remote reading)

Power Supplies

  • Thurlby 0-30V 2A Bench PSU
  • 3 x Thurlby dual output 2A bench PSUs, 0-30V (maybe 32V?)
  • 1 x dual output 35V 2A bench PSU, TTi PSS3502A

Soldering Equipment

  • Soldering Iron x 3

Electronic/Electrical Hand tools

  • Arduino controlled robot
  • Red/Blue/Yellow Ratchet Terminal Crimp Tool
  • Several sets of Jewellers screwdrivers
  • Box of small hand tools (pliers, screwdrivers, tweezers, etc)
  • Box of Right-to-Repair tools go gain access to domestic electronics and electrical devices.

Labspace / General

Laser Cutter

  • Just Add Sharks A3 Laser Cutter

3D Printers

Archived Printer Settings

Other Tools

  • Hot Melt Glue Guns (x2).

Printers

Hewlett Packard LJ2200
Black and White Laser Printer
Network enabled
Hostname: hacky_printer
IP Address xxx.xxx.xxx.140
Brother HL-3150CDW
Colour Laser Printer
Network enabled Ethernet and wifi
Cable Hostname:
IP Address xxx.xxx.xxx.141
Wifi Hostname:
IP Address xxx.xxx.xxx.142

Metrology

  • Tape Measures
  • 3 x 150mm Digital Vernier Calipers
  • 1 x Digital Angle Gauge
  • 1 x Basic Angle / Protractor / Depth Gauge
  • 7 x 1" Micrometer
  • 1 x 1" - 2" Micrometer
  • 1 x 3" - 4" Micrometer
  • 1 x 4" - 5" Micrometer (including check bar)
  • 1 x 25mm - 50mm Micrometer
  • 1 x 50mm - 75mm Micrometer
  • 1 x 1/4" - 3/4" Bore gauge
  • 1 x 25mm - 30mm Bore gauge
  • 1 x 35mm - 40mm Bore gauge
  • 1 x 50mm - 55mm Bore gauge
  • 1 x 0.25" 10,000 DTI Gauge
  • 1 x 0.25" 0.0001" DTI Gauge
  • 1 x 1" 0.001" DTI Gauge
  • 1 x 1" / 2" / 3" Depth Gauge
  • 1 x Feeler Gauge Set

Workshop - Mechanical / Metal

Machine Tools

Power Tools

Hand Tools

Workshop - Wood

Machine Tools

Record CL3-36 Wood Lathe
CL3 Manual
Multistar Titan Compact Chuck
Multistar Titan Chuck Accessory - Expanding Mandrel
  • Out of production
  • Manual in Manuals folder
Electra Beckum BAS 315/4 GWN 55 Band Saw
Capacity
  • Throat Width = 305mm
  • Max Cutting Height = 160mm
  • Sawtable Size = 400mm x 548mm
  • Sawtable Tilt = 0deg - 45deg (to Right)
  • Sawtable Height from floor on stand = 1100mm
  • Cutting Speed = 370, 800 m per min
  • Saw Blade width = 6 - 15mm
  • Saw Blade length = 2240mm
Caution
ONLY TRAINED USERS ARE TO CHANGE THE SAW BLADE
Manual in Manuals folder
Spares https://www.bedfordsaw.co.uk/spare-parts-for-elektra-beckum-bandsaws
Rexon SS16SA Scroll Saw
Capacity
  • Throat = 400mm
  • Max Cutting Height = 50mm
  • Table Tilt = 0deg - 45deg (to Left)
  • Blade Length = 127mm (5")
  • Cutting Speed = 800, 1400 per min
  • Blade Stroke = 19mm (3/4")
Caution
This machine has all Imperial fasteners. Not Metric!
Scroll saw blades, generally, stay sharp for 30 min - 2 hours.
Manual in Manuals folder
Spares https://www.rexonspares.co.uk/
Rexon 8" Drill Press
Capacity
  • Throat = 203mm (8")
  • Max Cutting Height = 50mm
  • Spindle Travel = 50mm
  • Spindle Taper = B16
  • Chuck Capacity (Taper) = 13mm (1/2") (B16)
  • Maximum Drill Diameter = 13mm
  • Number of Speeds = 5
  • Speed Range = 515, 915, 1430, 1950, 2580 RPM
Manual in Manuals folder
Performance FMTC10TS 254mm Table Saw
Capacity
  • Depth of Cut - Blade 90deg = 80mm
  • Depth of Cut - Blade 45deg = 55mm
  • Blade Size - 254mm x 2.8mm x 1.8mm
  • Blade Bore Size - 30mm
Manual in Manuals folder
Power-G Router Table
No Manual - Believe it is an Aldi/Lidl device.
Fitted with Bosch POF500A Router
Capacity
  • Power = 500W
  • No-Load Speed = 2700RPM
  • Collet = 6mm dia
  • Collet Special Accessory can provide 1/4" an 8mm dia (we dont have this currently)
  • Stroke = 52mm
Manual in Manuals folder

Power Tools

  • Aldi Workzone telescopic rotary sander.
  • Biscuit Jointer

Hand Tools

Kitchen

DIY / Building Tools

Personally Owned Equipment members are willing to allow other members to have access to

  • 'Up Plus 2' 3d printer (Mark M)
  • Small Wood turning lathe (driven by electric drill)(Mark M)
  • Mains powered wood router (Mark M)
  • Mains powered jigsaw (Mark M)(Mike)
  • Mains powered Detail Sander (Triangle head) (Mike)
  • Mains powered Sander (Mike)
  • Electric plane (Mark M)(Mike)
  • Dremel (Mark M)
  • Orbital sander (Mark M)
  • Angle grinder (Mark M)(Mike)
  • Sliding compound mitre saw (Rich)
  • Heat gun (Rich)(Mike)
  • Pillar drill (Rich)
  • 650W 2 stroke mains generator (Mike)
  • Selection of Torque Wrenches 1/2"drive (10Nm up) (Mike)
  • Bicycle Repair Workshop stand (Mike)

Equipment members have access to

  • Larger bed Laser cutter (Mark M, via Cambridge Makespace)
  • CNC router (Mark M, via Cambridge Makespace)
  • CNC router (Paul B, via his shed!)
  • 3D Printer (Paul B, via his shed!)